2N Security Relay 9159010
Order number: 9159010
The security relay is a simple accessory which we recommend using with each intercom and reader. It significantly improves the security of the installation at minimum additional cost. It prevents doors from being opened with a 12V battery – a technique which allows burglars to open low-power locks if they reach the cables connecting the intercom/reader to the lock. Watch a detailed video guide for installing the security relay.
Install the intercom security relay between the intercom/reader and lock and pair it with the 2N device. If an attempt is made to open the door, the relay will wait for a verification code from the 2N device. Once the signal arrives, it will actuate the attached lock and open the door. If the signal does not arrive, for example if a burglar attempts to open the door with a 12V battery, the door will remain closed.
Connect the relay to the intercom/reader using the OUT 1 output. The relay has a 12V OUT connector for low-power locks and an electromagnetic relay (RELAY 1) for high-power locks.
Suitable for These Products
- 2N IP Style
- 2N IP Verso 2.0
- 2N Access Unit M
- 2N Access Unit 2.0
The security relay is a simple accessory which we recommend using with each intercom and reader. It significantly improves the security of the installation at minimum additional cost. It prevents doors from being opened with a 12V battery – a technique which allows burglars to open low-power locks if they reach the cables connecting the intercom/reader to the lock. Watch a detailed video guide for installing the security relay.
Install the intercom security relay between the intercom/reader and lock and pair it with the 2N device. If an attempt is made to open the door, the relay will wait for a verification code from the 2N device. Once the signal arrives, it will actuate the attached lock and open the door. If the signal does not arrive, for example if a burglar attempts to open the door with a 12V battery, the door will remain closed.
Connect the relay to the intercom/reader using the OUT 1 output. The relay has a 12V OUT connector for low-power locks and an electromagnetic relay (RELAY 1) for high-power locks.
Suitable for These Products
- 2N IP Style
- 2N IP Verso 2.0
- 2N Access Unit M
- 2N Access Unit 2.0
TECHNICAL SPECIFICATION
Passive switch: NO and NC contacts, up to 30 V / 1 A AC/DC
Switched output:
• Where the security relay is fed from the intercom, 9 to 13 V DC is available on the output
depending on the power supply (PoE: 9 V; adapter: source voltage of minus 1 V) / 400 mA DC.
• Where the security relay is fed from an external power supply, 12 V / 700 mA DC is available on the output.
2N TELEKOMUNIKACE a.s., Modranská 621, 143 01 Prague 4, CZ, +420 261 301 500, sales@2n.cz, www.2n.cz
Dimensions: (56 x 31 x 24) mm
Weight: 20
Passive switch: NO and NC contacts, up to 30 V / 1 A AC/DC
Switched output:
• Where the security relay is fed from the intercom, 9 to 13 V DC is available on the output
depending on the power supply (PoE: 9 V; adapter: source voltage of minus 1 V) / 400 mA DC.
• Where the security relay is fed from an external power supply, 12 V / 700 mA DC is available on the output.
2N TELEKOMUNIKACE a.s., Modranská 621, 143 01 Prague 4, CZ, +420 261 301 500, sales@2n.cz, www.2n.cz
Dimensions: (56 x 31 x 24) mm
Weight: 20
-
Datasheet_security_relay_en
Slicni proizvodi:
Interfonska dodatna oprema: releji
Interfonska dodatna oprema: releji
Interfonska dodatna oprema: releji
